Sas-Tec SC-1/02 Shoulder/Elbow/Knee Armor

Sas-Tec SC-1/02 Shoulder/Elbow/Knee Armor

SAS-TEC armor is CE Level 2 protection. It is made from a polyurethane foam material, without a hard shell or edges, which surpasses the required CE values by 50%. The closed air cells function by means of progressive absorption; the material is soft and flexible in its normal state but a sudden impact will cause the protectors to harden and absorb the impact without transmitting the force to the body. 3D Protector from visco elastic soft foam with outstanding shock absorption values: Residual force < 20 kN. Optimal for breathable textile clothing due to the ventilation openings. Recommended protectors for use in elbow and knee areas. Also certified for use in the shoulder area. High-end engineering for greater safety.

Features:

• Protectors surpass the required values of EN 1621-1:2012, level 2
• Protectors are not destroyed by an impact and can still be used
• Protectors are lightweight
• Protectors are washable (remove, hand launder separately / water absorption less than one per cent) 

Armor for:

• Influx Jacket (Shoulder / Elbow)
• Phalanx Jacket (Shoulder / Elbow)
• Optima Jacket (Elbow)
• Covert Moto Flannel (Elbow)
• Covert Wax Shirt (Elbow)
• Drafter II Jacket (Elbow)
• Verano Jacket (Elbow)
• Vortex Jacket (Elbow)
• Drafter II Pant (Knee)
• Seattle Pant (Knee)
• Trey Pant (Knee)

Weight: ca. 72 g / item
Dimensions (L/W/H):  ca. 250/160/11 mm
Protection level: 2 (mean value below 20 kN)